Pepperl+Fuchs Inductive sensor NBB15-U1-Z2 (203011)

General specifications

Switching function: Normally open/closed (NO/NC)

Output type: Two-wire

Rated operating distance: 15 mm

Installation: flush

Output polarity: DC

Assured operating distance: 0 ... 12.15 mm

Actual operating distance: 13.5 ... 16.5 mm typ. 15 mm

Reduction factor rAl: 0.3

Reduction factor rCu: 0.3

Reduction factor r304: 0.7

Output type: 2-wire

Nominal ratings:

Operating voltage: 5 ... 60 V

Switching frequency: 0 ... 400 Hz

Hysteresis: typ. 5 %

Reverse polarity protection: reverse polarity tolerant

Short-circuit protection: yes

Voltage drop: ≤ 5 V

Voltage drop at IL

Voltage drop IL = 100 mA, switching element on ...: 5 V

Operating current: 2 ... 200 mA

Off-state current: 0 ... 0.5 mA

Switching state indicator: 2 LED, yellow

Functional safety related parameters:

MTTFd: 1133 a

Mission Time (TM): 20 a

Diagnostic Coverage (DC): 0 %

Compliance with standards and directives:

Standard: conformity

Standards:

EN 60947-5-2:2007

EN 60947-5-2/A1:2012

IEC 60947-5-2:2007

IEC 60947-5-2 AMD 1:2012

Approvals and certificates:

EAC conformity TR CU 020/2011

UL approval cULus Listed, General Purpose

CCC approval Certified by China Compulsory Certification (CCC)

Ambient conditions:

Ambient temperature: -25 ... 85 °C (-13 ... 185 °F)

Mechanical specifications:

Connection type: screw terminals

Information for connection:

A maximum of two conductors with the same core cross section may be mounted on one terminal connection! tightening torque 1.2 Nm + 10 %

Core cross-section: up to 2.5 mm2

Minimum core cross-section: without wire end ferrule 0.5 mm2, with connector sleeves 0.34 mm2

Maximum core cross-section: without wire end ferrule 2.5 mm2, with connector sleeves 1.5 mm2

Housing material: PA/metal with epoxy powder coating

Sensing face: PA

Housing: base plastic

Degree of protection: IP68 / IP69K Mass 225 g

Tightening torque: 1.8 Nm (housing)